When asphalt pavements are near the end of their useful life, or they incur damage from car fires, accidents, or other sources, resurfacing them can often be an economical way to restore them. Resurfacing, also known as overlaying, typically requires the use of an asphalt milling machine to grind off up to three inches of the pavement’s surface. However, contractors also use milling machines for cutting rumble strips, demolishing existing asphalt pavements, and eliminating flaws in the pavement’s surface. If you are considering a milling project, you may be wondering what preparations you need to make.
How Should I Plan for an Asphalt Milling Project?
Planning for your Dallas asphalt milling project is the best way to ensure that everything goes smoothly. You will need to work closely with your asphalt milling company, so be sure to maintain an effective line of communication with your contractor. The contractor providing your milling service is your best source of information about your specific project. However, there are a few things that most asphalt milling contractors would like their customers to understand.
1. Asphalt milling in Dallas can be challenging. Whether milling contractors are working on a private parking lot or a city street, there will likely be traffic near the work area. Dallas asphalt milling companies must erect the proper traffic control devices to ensure the safety of their employees as well as everyone else around the site. You can help your contractor by informing your tenants, employees, or residents that you have scheduled an asphalt milling service.
2. Let affected parties know when your contractor will be there as well as where the work will start and end. If streets or parking lots will be closed, let people know about any detours or alternative parking locations. Whether they are on foot or driving a vehicle, stress how important it is for them to avoid intruding into the work area.
3. Make sure that your milling contractor will not face any impediments upon arrival. Arrange to have abandoned vehicles towed away, relocate pallets of material, and trim low branches that hang over the pavement.
4. If any part of your pavement is behind a fence with a locked gate, make sure that your milling company knows how to access the area. You could deliver the key to your contractor the day before work is scheduled to begin, or you could tell your contractor to call one of your staff members for access.
What Else Should I Know About Asphalt Milling?
Dallas asphalt milling is efficient, economical, and environmentally safe. If you choose to combine your milling service with an overlay, you can reap several rewards.
1. After milling and resurfacing your pavement, it will look virtually indistinguishable from a new pavement.
2. The recommended maintenance for an asphalt overlay is the same as for a new pavement. Sealcoat it as soon as the asphalt cures, repair cracks promptly, and remove fluids that vehicles have dripped onto your pavement.
3. An overlay normally lasts between 10 and 15 years, but its life will depend on the traffic, maintenance, and care that it receives.
4. If the pavement’s foundation remains stable and strong, an asphalt milling company can mill and overlay the same area many times before a full reconstruction becomes necessary.
If you would like to learn more about asphalt milling in Dallas, Fort Worth, and the rest of the metroplex, contact HI-TEK Paving Services. We also offer parking lot striping, asphalt sealcoating, asphalt resurfacing, asphalt paving, asphalt repairs and crack repairs, parking lot maintenance, and concrete installation and repair. We are known for our dependability, workmanship, honesty, and service. To request a free quote, fill out our online form, call 214-908-9641, or email Kevin@HI-TEKPaving.com.